{
    "name": "Creality Ender-7",
    "version": 2,
    "inherits": "creality_base",
    "overrides": {
        "machine_name": { "default_value": "Creality Ender-7" },
        "machine_start_gcode": { "default_value": "\nM220 S100 \nM221 S100\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG28 X Y ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
        "machine_width": { "default_value": 252 },
        "machine_depth": { "default_value": 252 },
        "machine_height": { "default_value": 302 },
        "z_seam_type": { "value": "'sharpest_corner'"},
        "z_seam_corner": { "value": "'z_seam_corner_inner'"},
        "infill_sparse_density": { "value": "20"},
        "infill_pattern": { "value": "'lines'"},
		"infill_angles" : {"value": "[90,180]"},
		"infill_area_inner_offset" : {"value": 0.4},
        "infill_overlap":{"value": 0},    
        "material_print_temperature":{"value": 220},
        "material_bed_temperature":{"value": 65},
        "retraction_amount":{"value": 10},  
        "speed_travel": { "value": 250.0 },
        "speed_print_layer_0": { "value": 20.0 },
        "speed_travel_layer_0": { "value": 30.0 },
        "retraction_speed": { "value": 80.0 }, 	
        "machine_head_polygon": { "default_value": [
                [-26, 34],
                [-26, -32],
                [22, -32],
                [22, 34]
            ]
        },
        "machine_head_with_fans_polygon": { "default_value": [
                [-26, 34],
                [-26, -32],
                [32, -32],
                [32, 34]
            ]
        },

        "gantry_height": { "value": 25 },



		"line_width":{"value":0.44},

		"wall_thickness":{"resolve":"line_width * 3"},
		"wall_line_count":{"value":3},
		
		"small_hole_max_size":{"value":5},
		"small_feature_speed_factor":{"value":30},
		"small_feature_speed_factor_0":{"value":20},
		
		"retraction_combing":{"value":"off"},
		
		"speed_travel_layer_0":{"value":50},
		"zig_zaggify_infill":{"value":true},
		"infill_before_walls":{"value":true},
		
		"wall_0_wipe_dist":{"value":0.8},
		"meshfix_maximum_resolution":{"value":0.65},
		
		"meshfix_maximum_deviation":{"value":0.025},
		"meshfix_maximum_travel_resolution":{"value":0.65},
		
		"speed_print":{"value":250},
		"speed_infill":{"value":250},
		"infill_material_flow":{"value":125},
		
		
		"speed_wall":{"value":100},
		"speed_wall_0":{"value":80},
		"speed_wall_x":{"value":100},
		"speed_roofing":{"value":100},
		"speed_topbottom":{"value":125},
		"speed_support":{"value":50},
		"speed_support_infill":{"value":100}
		
    },
    "metadata": {
        "quality_definition": "creality_base",
        "visible": true
    }
}